江苏象王:TD75 型通用带式输送机 TD75 型
品牌：象王
产品详情
产品参数
产品图片
一、用途
本机广泛就应用于冶金、煤炭、水电、交通等部门，输送散状物料或成件物品。根据输送线路要求，可以单独一台，以多台或与其它输送机组成系统作水平倾斜输送。
输送机在一般环境温度+40℃到-10℃范围内使用，对于有防尘、防爆、防腐蚀要求的场合和需要输送带可逆行输送时，请在定货时另行洽谈。
二、技术特性和主要参数
TD75型可输送 堆积比重1.0-2.5吨/m3的各种散状物品，本厂生产带宽500、600、800、1000等、规格，传动功率从1.5KW到13KW。带速有0.8、1.0、1.25、1.60四种。最大输送量见表。
表中输送量是在物料堆积比重V=1吨/m3，输送机倾斜项为0-7度，物料在带上的堆积角为30度的条件计算的。
一、Purpose of usage:
This machine is widely used in metallurgy, coal, water and electricity, communication, and other industries to transport bulk cargo or pieces. According to the requirements, it can make horizontal or slant transportation by itself or combined with other conveyors.
Usually, the conveyor is used in the environment with the temperature of +40?~?0?. For the conveyor to be used in the environment of anti-dust, anti-explosion, anti-corrosion, or if the conveyor is to be back run, consult with the factory in placing orders.
二、Technical features and Main parameters:
Model TD75 can convey kinds of bulk goods with the bulk specific weight of 1.0-2.5T/m3. The factory manufactures belt抯 width of 500, 600, 800, 1000, etc. Transmission power from 1.5KW to 13KW. Four belt speeds: 0.8, 1.0, 1.25, 1.60. For the Max. delivery value, refer to the table.
The values in the table is calculated on the basis of: the bulk specific weight V="1T/m3," the conveyor抯 inclination is 0-7 degrees, the stacking angle of material on the belt is 30 degree.
本机广泛就应用于冶金、煤炭、水电、交通等部门，输送散状物料或成件物品。根据输送线路要求，可以单独一台，以多台或与其它输送机组成系统作水平倾斜输送。
输送机在一般环境温度+40℃到-10℃范围内使用，对于有防尘、防爆、防腐蚀要求的场合和需要输送带可逆行输送时，请在定货时另行洽谈。
二、技术特性和主要参数
TD75型可输送 堆积比重1.0-2.5吨/m3的各种散状物品，本厂生产带宽500、600、800、1000等、规格，传动功率从1.5KW到13KW。带速有0.8、1.0、1.25、1.60四种。最大输送量见表。
表中输送量是在物料堆积比重V=1吨/m3，输送机倾斜项为0-7度，物料在带上的堆积角为30度的条件计算的。
一、Purpose of usage:
This machine is widely used in metallurgy, coal, water and electricity, communication, and other industries to transport bulk cargo or pieces. According to the requirements, it can make horizontal or slant transportation by itself or combined with other conveyors.
Usually, the conveyor is used in the environment with the temperature of +40?~?0?. For the conveyor to be used in the environment of anti-dust, anti-explosion, anti-corrosion, or if the conveyor is to be back run, consult with the factory in placing orders.
二、Technical features and Main parameters:
Model TD75 can convey kinds of bulk goods with the bulk specific weight of 1.0-2.5T/m3. The factory manufactures belt抯 width of 500, 600, 800, 1000, etc. Transmission power from 1.5KW to 13KW. Four belt speeds: 0.8, 1.0, 1.25, 1.60. For the Max. delivery value, refer to the table.
The values in the table is calculated on the basis of: the bulk specific weight V="1T/m3," the conveyor抯 inclination is 0-7 degrees, the stacking angle of material on the belt is 30 degree.
